ProCRYL Topcoats

ProCryl KT Topcoat is a 100% reactive MMA resin topcoat specifically designed for food and beverage processing environments where wet, slippery conditions and chemical exposure are common. It offers outstanding compressive strength and temperature resistance—withstanding constant immersion up to 180°F—making it ideal for use in hot wash-down areas, kitchens, and production zones. The formulation supports a slip-resistant profile when applied over broadcast textures, helping reduce the risk of falls in wet environments. ProCryl KT is VOC-compliant, cures in about 60 minutes, and can be installed over a wide temperature range with adjustments to catalyst levels. When applied at the proper thickness (10–20 mils over smooth or up to 30 mils over textured systems), it delivers a durable, safe, and hygienic surface. Colorants can be added for visibility or zoning, and roller technique is critical to maintaining uniform finish.

• Related Products
• ProCRYL INITIATOR
• ProCRYL KT (Kitchen Top) RESIN

ProCryl HT Topcoat is a 100% reactive methyl methacrylate (MMA) resin designed to withstand extreme mechanical abuse in demanding environments. Engineered for maximum abrasion resistance and compressive strength, it is ideally suited for industrial floors exposed to heavy vehicle traffic, rolling loads, and repeated impact. Its excellent resistance to gasoline, oils, and tire marks makes it ideal for maintenance shops, warehouses, and other high-traffic service areas. ProCryl HT cures to full strength in approximately 60 minutes, allowing for rapid return to service and minimal downtime. It should be applied at 10–20 mils over a smooth basecoat, with squeegee and back-roll methods recommended to prevent visual inconsistencies. As with all ProCryl systems, installation can proceed even in cold environments using ProCryl LTC catalyst when needed.

• Related Products
• ProCRYL INITIATOR
• ProCRYL HT (Hard Top) RESIN

ProCryl UVR Topcoat is a 100% reactive, medium-viscosity methyl methacrylate (MMA) resin formulated for high-performance indoor and outdoor applications where UV stability, elasticity, and impact resistance are critical. This version of the ProCryl MMA Topcoat line is designed to remain flexible under stress, offering excellent crack-bridging capabilities and resistance to mechanical shock. It is particularly well-suited for exterior surfaces or interior areas subject to thermal movement, substrate flex, or vibration—especially those with low mechanical strength. ProCryl UVR Topcoat cures rapidly to full strength in about 60 minutes and can be applied in a wide range of temperatures, including sub-freezing conditions with appropriate catalyst adjustments. It is VOC-compliant, resistant to yellowing under sunlight exposure, and designed for use at a coating thickness of 10–20 mils over smooth basecoats. Proper mixing, immediate back-rolling, and cure verification between coats ensure optimal performance and appearance.

• Related Products
• ProCRYL INITIATOR
• ProCRYL UVR RESIN