ProCryl CS is a clear, 100% solids, fast curing, high strength methyl methacrylate (MMA) sealing and dustproofing system. It is designed to protect and enhance the appearance of architectural concrete, decorative polymer concrete and stamped overlays. It’s practical & economical while offering good versatility and durability in either two or three coat applications. The ProCryl CS system provides a hard wearing finish that’s chemical, stain, and abrasion resistant.
ProCryl Primer
100% solids, fast curing, low viscosity MMA primer applied as a clear coat sealer. A second coat may be needed for porous substrates.
Products Used
ProCryl HT, KT, or UVR Topcoat
Clear MMA topcoat providing a hardwearing finish. HT for general durability, KT for point impact/high temps (up to 180°F), and UVR for outdoor light stability. Thickness: 10–16 mils over smooth base.
Products Used
- Fast Cure (1 hr. return to service following finish coat)
- Indoor & Outdoor Applications
- Low Viscosity - Penetrating & Strengthening Concrete
- Non-Porous, Easy to Clean & Maintain
- UV Stable, Low Glare, Satin Finish
- Applied Down to 0°F
- Available with MicrobeBLOK