ProCryl CQ System

ProCryl CQ are seamless flooring systems consisting of 100% solids, fast curing, reactive methyl methacrylate (MMA) and decorative colored quartz aggregate (40 mesh – “fine” or 25 mesh – “course”) to yield a nominal 1/16"-3/16" thickness overlay. ProCryl CQ-SL is a fast curing, high build, self-leveling MMA slurry matrix formula broadcasted with colored quartz aggregate to yield a nominal 3/16"-1/4" thickness overlay. Both the CQ (single & double broadcast) and CQ-SL (self-level broadcast) systems are hardwearing and provide excellent chemical, stain, and abrasion resistance. When required, MicrobeBLOK, an optional antimicrobial additive is available.

Contact Sales
System Data Sheets

View or download detailed information concerning this ProREZ system with the following PDF resources.

System Design Steps
1

ProCryl Primer

100% solids, fast curing, low viscosity, reactive MMA applied as a clear or pigmented sealer direct to concrete. Installed at no less than 100 s.f./gallon. Porous substrates may require two coats.

Products Used
2

ProCryl Binder or CQ-SL Slurry

Clear, fast-curing MMA binder broadcasted with decorative quartz (40 or 25 mesh). CQ-SL variant combines 12.5 lbs. of ProFill SL filler to build a 3/16"-1/4" self-leveling resurfacing system.

Products Used
3

ProCryl KT or UVR Topcoat

Clear, fast-curing MMA topcoat providing impact and high-temperature resistance. UVR variant adds outdoor light stability. Can be applied as a single or dual coat depending on texture needs.

Products Used
System Benefits
  • Fast Cure (1 hr. return to service following finish coat)
  • Indoor & Outdoor Applications
  • UV Resistant
  • Low Glare, Satin Finish
  • Applied Down to 0°F
  • High Build & Decorative
  • Excellent Durability & Hard-Wearing
  • Integral Cove Base
  • Colorfast Decorative Quartz
  • Varied Non-Slip Textures
  • Available with MicrobeBLOK
  • Meets ADA, USDA, FDA, and OSHA Requirements