ProTHANE Gloss S-ResinPROTHANE Gloss S-Resin

DESCRIPTION

ProThane WB is a single component UV  Stable, waterborne polyurethane available in  a Semi Gloss, Satin, or Matte finish. Based on a  “state of the art” self-crosslinking mechanism,  this unique chemistry provides abrasion  resistance performance on par with a 2k,  moisture cured urethane and higher build  thickness per application than other water  based urethane coatings & sealers.

ProThane WB can be applied directly to  concrete, without darkening the surface,  for  unparalleled performance versus other “Grind  & Seal” applications. ProThane WB can also  be used for Safety Line Striping and as a final  topcoat over decorative systems where a  low-odor, fast curing, without compromising  performance is required. Can be pigmented  with ProREZ ProColor WB colorant. (Refer to  color chart.)  

FEATURES & BENEFITS

•  UV Stable
•  Excellent Gloss and Color Retention
•  Very Low Odor
•  Fast Dry
•  Does Not Darken the Concrete for  Grind & Seal Applications 
•  Abrasion Resistance Comparable with Moisture Cured 2k Urethanes
•  Resistant to “Hot Tire Pickup”
•  Excellent Chemical Resistance
•  High Solids
•  50 g/L for Better Air Quality  

COLORS

9 Standard Colors – See “Color Guide”

TYPICAL USES

•  Grind & Seal  
•  Commercial/Retail
•  Warehouses  
•  Restaurant (Front of House)
•  Laboratories  
•  Schools
•  Hospitals  u Safety Lines

PACKAGING

•  1 Gallon – white pail                                        
•  5 Gallon – white pail

STORAGE

Materials should be stored indoors between  60°F (16°C) and 90°F (32°C).

SHELF LIFE

One (1) year from date of manufacture.

LIMITATIONS

This product is best suited for application in  temperatures between 60°F and 90°F. Do not  freeze.

OPTIONAL

ProGrip (non-skid)ProWear (wear resistance) ProColor WB (on-site pigmenting)

PRODUCT COVERAGE & MIXING GUIDE

Always premix ProThane WB single  component with a slow speed drill and  dispersion blade, to ensure the product is  uniform in consistency.

CLEANING GUIDELINES & MAINTENANCE

Allow floor coating to cure at least 3 days before  cleaning by mechanical means (e.g., sweeper,  scrubber, disc machine).

CARE

Proper maintenance will increase the service  life and help maintain the appearance of your  new ProREZ floor coating system. This product  is considered to be a low maintenance coating  system, however, certain textures and service  environments require specific procedures. SEE  “CLEANING GUIDELINES”  for more information.

ProREZ Coatings, LLC

CAUTION

Avoid scratching or gouging the surface. All  floor coatings will scratch if heavy or sharp  objects are dragged across the surface.

Do not drop heavy or pointed items on the   floor as this may cause chipping or concrete  pop-outs in the case of a weak substrate cap.

Rubber tires can permanently stain the floor  coating from plasticizer migration. In warehouse  & industrial settings, the use of non-marking  tires is highly recommended to prevent  discoloration. Rubber burns from quick stops  and starts can heat the coating to its softening  temperature, causing permanent marking.

REPAIRS

Repair gouges or scratches or chip outs as   soon as possible to prevent moisture or  chemical contamination.

DISPOSAL

Dispose in accordance with federal, state and  local regulations.

TECHNICAL SUPPORT

For any application questions, please call 

SDS

PLEASE SEE SAFETY DATA SHEET (SDS) FOR  SAFETY AND PRECAUTIONS. USE PRODUCT  AS DIRECTED. KEEP OUT OF THE REACH