DESCRIPTION
TYPICAL USES
- All Food & Beverage Processing
- Pharmaceutical Plants
- Commercial Kitchens
- Hot/Cold Wash Areas
- Chemical Processing
- Chilling/Refrigeration Areas
APPEARANCE
Natural – (Use ProColor CU or ProColor Universal Colorants, if pigment required.)
COLORS
FEATURES & BENEFITS
- Low Odor, Zero VOCs
- Excellent Thermal Shock Resistance
- Meets USDA, FDA, & CFIA Standards
- Can Be Applied at Lower Temperature (use
- Can Be Applied to 5 Day Old Concrete
- On-Site Pigmenting if Required
PACKAGING
Pre-measured kits: 1 unit of PART A Resin, 1 unit of PART B Hardener, and 1 bag PART C Blended Aggregate bags. PART A – 3 lbs PART B – 3 lbs PART C – 2X 32 lbs
STORAGE
Materials should be stored indoors between 65°F (18°C) and 90°F (32°C). DO NOT ALLOW TO FREEZE.
SHELF LIFE
- Unopened containers - 1 year from date of manufacture.
- Cement based aggregates should be stored in a dry environment for maximum shelf life.
LIMITATIONS
SURFACE PREPARATION
This product requires preparation in order to perform as expected. Substrate must be mechanically profiled (ASTM 4259-83), clean, sound, and dry.
COVERAGE RATES
A kit of ProKrete CM will yield approximately 0.28 cu ft. per unit at 1/8" in thickness. It will also cover approximately 14 s.f. at 1/4" and 50 s.f. at 1/16" in thickness.
PHYSICAL CHARACTERISTICS
Solids Content 100%
Viscosity at 70°F Not Applicable
Pot life at 70°F 20 minutes
Cure Time, Tack-Free at 70°F 6 hours
Working Time at 70°F 20 minutes
Volatile Organic Compound (VOC) nil
PHYSICAL PROPERTY TEST METHOD RESULTS
Compressive Strength ASTM C-579 7200 psi
Tensile Strength ASTM C-307 1000 psi
Flexural Strength ASTM C-580 1600 psi
ProREZ Coatings, LLC
P.O. Box 153, Cromwell, CT 06416-0153 877.511.3456 www.prorezcoatings.com
MIXING INSTRUCTIONS
Add Resin (A) & Hardener (B) to a mixing vessel, mix with slow speed drill if mixing in mortar mixer or allow to mix in “Ted Baugh” type mixer for approximate 30-45 seconds. Slowly add 1 bag of Aggregate Filler (C) mixing for another 60 seconds and ensuring a homogeneous mix is attained. Apply mortar immediately- spreading the material over the primed surface. The material should be applied “wet on wet” for best results using a screed bar and or trowels.
APPLICATION EQUIPMENT
- Personal Protective Equipment (PPE) & Clothing per SDS (Safety Data Sheet)
- Mortar Mixer or Rotary Pail Mixer Similar to “Ted Baugh” Type
- Clean Mixing Container
- Low Speed Drill (Pre-mix of Liquids)
- Trowels (Steel Patching, Margin, and/or Cove)
- Screed Bar
DISPOSAL
Dispose in accordance with federal, state and local regulations.
TECHNICAL SUPPORT
For any application questions, please call ProREZ technical support at 877.511.3456.
SDS
PLEASE SEE SAFETY DATA SHEET (SDS) FOR SAFETY AND PRECAUTIONS. USE PRODUCT AS DIRECTED. KEEP OUT OF
