ProTHANE Satin F

DESCRIPTION

ProThane is a uniquely versatile high- performance hybrid polyurethane top  coat. ProThane is a clear two component  thermosetting, low odor, 100% solids, U-V  stable urethane. It has been designed to be  used in areas that require maximum abrasion  and wear resistance. For applications with  relative humidity <40% and/or temperatures  <60°F (“low range”), ProThane F-Resin  is available. For applications with relative  humidity >70% and/or temperatures >70°F  (“high range”), ProThane HH-Resin is  available. For all other applications, ProThane S-Resin should be used. For installations 

requiring a low gloss finish, ProThane Satin  and Satin F-Resins are available.  

FEATURES & BENEFITS

•  Excellent Abrasion Resistance
•  No VOC, Low Odor
•  U-V Stable
•  High & Low Humidity Curable
•  High & Low Gloss
•  ProColor Universal Colorants 
•  MicrobeBLOK Antimicrobial
•  Meets USDA & FDA Standards
•  OSHA and ADA Compliant
•  Complies with VOC Regulations by the EPA for AIM Coatings

COLORS

See “Color Guide”

TYPICAL USES

•  Laboratories  
•  Hospitals
•  Garages  
•  Hangars
•  Pharmaceutical Plants  
•  Kennels
•  Clean Rooms  u Schools
•  Kitchens  
•  Commercial/Retail

PACKAGING

•  1 gallon white pail - Resins                                       
•  1 gallon black pail - Hardener

STORAGE

Materials should be stored indoors between  60°F (16°C) and 90°F (32°C).

SHELF LIFE

One (1) year from date of manufacture.

LIMITATIONS

This product is best suited for application in  temperatures between 60°F and 90°F. Some  light colors may require multiple coats for  adequate hiding power. Certain colors appear  white when scratched. Slight batch-to-batch  color variations may occur. When ordering to  match a previous color, inquire if the same  batch number or quality control number is   still available.

OPTIONALProGrip  (non-skid)

PRODUCTS GUIDE

1. ProThane S-Resin offers extended working  time up to 40 minutes at 70°F, 50% RH. Rising  temperatures above 70°F will measurably  reduce working time. When mixed at 1 part Resin and 2 parts Hardener, it can be applied 

from 3-4 mils in thickness. 

2. ProThane F-Resin is designed for use when   the relative humidity is below 40%, and/or the  ambient temperatue is below 60°F. This resin  will also provide an accelerated cure for fast- track applications when the relative humidity  is above 50%, and/or the ambient temperatue  is above 60ºF. When mixed at 1 part Resin and 2 parts Hardener, it can be applied from 3-4 

mils in thickness.

3. ProThane HH-Resin offers optimal working  times in higher temperatures and relative  humidities. It’s best applied at temperatures  of 70°F and rising humidities above 70%, with  working times up to 40 minutes. When mixed  at 1 part Resin and 2 parts Hardener, it can be  applied from 3-4 mils in thickness.

4. ProThane Satin Resin is a low gloss, high  performance finish coat offering similar  working time to the ProThane Resin. When  mixed at 1 part Resin and 1 part Hardener, it  can be applied from 3-4 mils in thickness.

5. ProThane Satin F-Resin is designed for use  when the relative humidity is below 50%,   and/or the ambient temperature is below 60°F.  This resin will also provide an accelerated cure  for fast-track applications when the relative  humidity is above 50%, and/or the ambient  temperatue is above 60°F. When mixed at 1 part Resin and 1 part Hardener, it can be 

applied from 3-4 mils in thickness.

PRELIMINARY FLOOR INSPECTIONS

temperature during application and curing.  Floor temperature and materials should be  between 65°F (18°C) and 90°F (32°C). Humidity  must be less than 90%. DO NOT coat unless  floor temperature is more than five degrees  over the dew point.

COVERAGE RATE

A gallon of ProThane will cover in the  following manner, with a standard spread rate for a finish topcoat at 3-4 mils or 401-534 

s.f. per gallon. *Application of body/grout and  topcoats are variable in thickness depending  upon condition of substrate and type of system.

RECOAT REQUIREMENTS

In the event of a recoat application beyond   36 hours, the existing topcoat should be   lightly ground using 100-grit diamonds,  vacuuming, and tack-wiping before   re-application. Please call ProREZ technical  support for further instructions.

MIXING INSTRUCTIONS

Application Equipment:

•  Personal Protective Equipment (PPE) & clothing per SDS (Safety Data Sheet)
•  Jiffy® Mixer Blade (ES Model)
•  Clean Mixing Container
•  Low Speed /High Torque Power Drill
•  Shed-Resistant Roller Cover - 1/4" Roller Nap
•  Wide-Boy Bucket for “Dip ‘n’ Roll”ProREZ Coatings, LLCP.O. Box 153, Cromwell, CT  06416-0153877.511.3456         www.prorezcoatings.comProTHANE

field pigmenting, it should be added and mixed  in homogenously to the resin prior to adding   the hardener. When combining, be sure to add  the resin (clear or pigmented) into the clean  mixing container first. Then add the hardener  scraping out the container. Always pour into  the center of the mixing container. Mix the  components thoroughly for 1-2 minutes with  a Jiffler ES style mix blade. Mix only enough  material at one time that can be applied without  exceeding the pot life.

•  ProWear additive is available for enhanced abrasion and wear resistance in the ProThane finish coat. NOT to be used in WET areas. One (1) quart can per 1.5 gallon mix.
•  ProGrip additive can be included for enhanced non-slip resistance. 4-6 ozv. per gallon of liquid.

CLEANING GUIDELINES & MAINTENANCE

Allow floor coating to cure at least 3 days before  cleaning by mechanical means (e.g., sweeper,  scrubber, disc machine).

CARE

Proper maintenance will increase the service  life and help maintain the appearance of your  new ProREZ floor coating system.  This product  is considered to be a low maintenance coating  system, however, certain textures and service  environments require specific procedures. SEE  “CLEANING GUIDELINES”  for more information.

CAUTION

Avoid scratching or gouging the surface. All  floor coatings will scratch if heavy or sharp  objects are dragged across the surface.

Do not drop heavy or pointed items on the   floor as this may cause chipping or concrete  pop-outs in the case of a weak substrate cap.

Rubber tires can permanently stain the floor  coating from plasticizer migration. In warehouse  & industrial settings, the use of non-marking  tires is highly recommended to prevent  discoloration. Rubber burns from quick stops  and starts can heat the coating to its softening  temperature, causing permanent marking.

REPAIRS

Repair gouges or scratches or chip outs as   soon as possible to prevent moisture or  chemical contamination.

Warranties: Seller warrants that its goods, as described on the face hereof, are free from any defects in material or workmanship. Seller makes no other  warranty, express or implied, and all implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed. Seller shall not be  liable for prospective profits or special indirect or consequential damages. Seller’s sole liability and buyer’s exclusive remedy for breach of any warranty  as expressly limited, at seller’s option, to replacement at the original F.O.B. point or refund of purchase price. Seller shall not be responsible for any claim  resulting from failure to utilize product in the manner in which it was intended and in accordance with instruction provided for use of product. Any  claim for breach of warranty shall be deemed waived unless buyer shall give seller written notice of such claim within sixty (60) days after delivery and  shall allow seller reasonable opportunity to investigate claim and inspect product.

DISPOSAL

Dispose in accordance with federal, state and  local regulations.

TECHNICAL SUPPORT

SDS

PLEASE SEE SAFETY DATA SHEET (SDS)  FOR SAFETY AND PRECAUTIONS. USE  PRODUCT AS DIRECTED. KEEP OUT OF THE REACH OF CHILDREN.